Pellerin Milnor Corporation

MWT18X4

Back

Image Gallery

Save Labor

The Milnor Model MWT18X4 provides multiple ways to save on your labor costs and improve employee efficiency, including:

E-P Express®control

This median control with 30 programmable formulas provides flexibility and bright display allows operator to choose from real words, not codes. Standard controller features English/Spanish (other languages optional). Controller also provides diagnostic and error messages which shorten training time of new employees and allows for fewer operator errors

Process Times

Milnor's microprocessors and software are fast and reliable allowing for quick processing of programmed formulas. Faster process times mean less time processing linen.

Back To Top

Save on Linen Replacement Costs

The second highest expense of a laundry is the cost of linen. The Milnor MWT18X4 can help you to extend linen life:

Safe Chemical Injection System

Chemicals are injected in the rear of the machine (unlike certain brands where chemicals are injected near the front of the machine at eye-level). Chemicals are diluted and flushed into the sump of the washer-extractor so that raw chemical does not come in direct contact with the linen or the stainless steel.

Back To Top

Save Energy

A Milnor MWT18X4 can help to reduce your utility bills with its:

Proper Cylinder Design

Milnor's bigger cylinder perforations provide better wash quality by promoting excellent interchange of the goods with water and chemistry, better rinsing by allowing rinse water to freely interact with the goods, and better extraction by allowing water to escape from goods easily and quickly. All components work together to ensure fewer costly rewashes and less drying time.

Frequency Drive System

A simple single-motor inverter drive reaches maximum extraction speed more gradually and efficiently, reducing peak electricity amperage draw compared to multi-speed motor machines.

Back To Top

Save Water

A Milnor MWT18X4 can reduce fresh water consumption with its:

Three Simple Fast Fill Water Valves

Simple hot and cold water inlets are used to quickly fill the washer without fill level overshoot. A third water inlet is used to thoroughly dilute chemicals so that raw chemical does not directly contact and damage linens.

Proper Cylinder Design

Perforation pattern and perforated ribs allow for rapid exchange of water with the goods, efficiently utilizing the water.

Back To Top

Save Money (Total Cost of Ownership)

There are many features designed into a MWT18X4 washer-extractor to reduce your total cost of ownership - saving you money for years AFTER your initial investment.

Value-Priced

Low initial capital ownership coupled with proven Milnor engineering makes the MWT18X4 an excellent choice for your laundry.

Long Machine Life

Milnor machines typically last longer because of their legendary ruggedness, thoughtful design and dependable quality.

Support Worldwide

Milnor laundry machinery is sold worldwide by the most highly regarded dealer network. Dealers not only provide complete equipment packages, but also can help with planning and installation and offer technical support.

Bearings

Tapered roller bearings have a large contact area - spreading force and contributing to long life. Front and rear bearings are fixed in the same housing, preventing damaging misalignment. And, a pressed-on basket means it does not need to be replaced when a bearing change becomes necessary. Milnor's bearing design is long proven while other companies keep experimenting.

L10 Life

Every Milnor design model is tested for a minimum of 1,000 consecutive hours in a high-extract, out-of-balance state - ensuring your machine is tough and will stand up to years of use.

Back To Top

MWT18X4 Specifications

Suspension Rigid
Cabinet Cabinet
Controller E-P Express®
Capacity 45 lb.(20 kg)
Width 34.45 in.(875 mm)
Depth 47.41 in.(1204 mm)
Height 52.70 in.(1339 mm)
Door Opening 15.70 in.(399 mm)
Shipping Weight 816 lb.(370 kg)
Cylinder Open Pocket
Cylinder Diameter 27.56 in.(700 mm)
Cylinder Depth 18.43 in.(468 mm)
Cylinder Volume 6.4 cu. ft.(181 L)
Wash Speed 39 rpm
Distribution Speed 71 rpm
Extraction Speed 480 rpm
Extraction G-Force 90 Gs
Drive Motor 3 HP(2.24 kW)
Inlet Connection 0.75 in.(19 mm)
Drain Valve 3 in.(76 mm)
Markets OPL
Specifications and appearance are subject to change without notice.

ARCAT Architectural Resources