Pellerin Milnor Corporation

Technical Knowledge Base


Setting up the Datafusion interface between Milnor and the rail system can be confusing. The attached document discusses this setup.

The physical setup involves running a Cat-5 cable between a switch in the Miltrac computer cabinet to a switch in the Rail System computer cabinet. Both the Milnor computer (Miltrac) and the Rail System computer have to have software running to govern the communication. This software is referred to as a web service.

CSH Feb 6, 2013
Last updated: 02/07/2013 / Node ID: 1900 / Key Chain: 12.1.76C.