The replacement cables are provided with one end terminated. The cable can be threaded through the 5 pulleys and then terminated at the turnbuckle end with a bolt on cable clamp.

If cables were provided that were terminated on both ends, the pulleys would have to be removed and this is difficult because of the placement of the pulleys and access to the nuts that retain them.

These part numbers apply to the following dryers. They will come as an assembly.
64058 and 64064 dryers gas or steam will using these two load door cables.
A77LD011 is the short cable
A77LD012 is the long cable


CSH 26 March 2013