Pellerin Milnor Corporation

Technical Knowledge Base

Burks Pumps

Attached is the Burks Installation and Operation Manual. Burks pumps have been used on Splitter, Lifter, and Reuse / Flush Tank applications on CBW's. The Burks pump has a plastic case with a plastic impeller. Typically it is a 3/4 hp motor. On page 4 and 5 it goes through the instructions on how to change the mechanical seal.

27E955/6MR Kit to rebuilld the pump. The kit has BUNA parts.
27E955/6MV Kit to rebuild the pump. The kit has VITON parts.
27E955M96 is the pump
Last updated: 12/29/2014 / Node ID: 2151 / Key Chain: 12.1.11E.657.867.