Pellerin Milnor Corporation

Technical Knowledge Base

Brake Resistor

Installing brake resistor on coin machines
See the attachment for instructions to add the brake resistor to machines that originally had the Yaskawa GPD305 inverter with the Yaskawa V1000

Typically after this conversion the machine may show "INVERTER FAULT" with the inverter displaying oV error. The GPD305 does not use the brake resistor; however the V1000 needs one to absorb the excessive voltage regenerated by the motor during deceleration from final extract.
Last updated: 11/02/2012 / Node ID: 1859 / Key Chain: