- Washer-ExtractorsWide range of features and benefits, 25-700 lb. capacities Designed for durability and ease of use
- DryersIdeal for any installation Designed for high productivity Models range up to large pass-through dryers
- Coin-OpCoin-Operated Washers Coin-Operated Dryers
- CBW® Batch WashersIdeal for processing at least 800 lb. (363 kg) per hour Designed for automated operation
- Extraction SystemsSingle-stage presses, Two-stage presses, or Centrifugal extractors Various installation arrangements
- Washer-Extractor ControlsWash formula management from complex to simple
- Industry Solutions
- Industrial / Linen Supply
- On-Premises Laundry
- Vended Laundry
- Support & Safety
- Contact Us
The Milnor Model MWT16X5 provides multiple ways to save on your labor costs and improve employee efficiency, including:
This median control with 30 programmable formulas provides flexibility and bright display allows operator to choose from real words, not codes. Standard controller features English/Spanish (other languages optional). Controller also provides diagnostic and error messages which shorten training time of new employees and allows for fewer operator errors
Milnor's microprocessors and software are fast and reliable allowing for quick processing of programmed formulas. Faster process times mean less time processing linen.
Save on Linen Replacement Costs
The second highest expense of a laundry is the cost of linen. The Milnor MWT16X5 can help you to extend linen life:
Safe Chemical Injection System
Chemicals are injected in the rear of the machine (unlike certain brands where chemicals are injected near the front of the machine at eye-level). Chemicals are diluted and flushed into the sump of the washer-extractor so that raw chemical does not come in direct contact with the linen or the stainless steel.
A Milnor MWT16X5 can help to reduce your utility bills with its:
Frequency Drive System
A simple single-motor inverter drive reaches maximum extraction speed more gradually and efficiently, reducing peak electricity amperage draw compared to multi-speed motor machines.
A Milnor MWT16X5 can reduce fresh water consumption with its:
Three Simple Fast Fill Water Valves
Simple hot and cold water inlets are used to quickly fill the washer without fill level overshoot. A third water inlet is used to thoroughly dilute chemicals so that raw chemical does not directly contact and damage linens.
Proper Cylinder Design
Perforation pattern and perforated ribs allow for rapid exchange of water with the goods, efficiently utilizing the water.
Save Money (Total Cost of Ownership)
There are many features designed into a MWT16X5 washer-extractor to reduce your total cost of ownership - saving you money for years AFTER your initial investment.
Low initial capital ownership coupled with proven Milnor engineering makes the MWT16X5 an excellent choice for your laundry.
Long Machine Life
Milnor machines typically last longer because of their legendary ruggedness, thoughtful design and dependable quality.
Milnor laundry machinery is sold worldwide by the most highly regarded dealer network. Dealers not only provide complete equipment packages, but also can help with planning and installation and offer technical support.
Tapered roller bearings have a large contact area - spreading force and contributing to long life. Front and rear bearings are fixed in the same housing, preventing damaging misalignment. And, a pressed-on basket means it does not need to be replaced when a bearing change becomes necessary. Milnor's bearing design is long proven while other companies keep experimenting.
Every Milnor design model is tested for a minimum of 1,000 consecutive hours in a high-extract, out-of-balance state - ensuring your machine is tough and will stand up to years of use.
|Capacity||35 lb.(16 kg)|
|Width||29 in.(737 mm)|
|Depth||42.13 in.(1070 mm)|
|Height||43.19 in.(1097 mm)|
|Door Opening||12 in.(305 mm)|
|Net Weight||581 lb.(264 kg)|
|Cylinder Diameter||23 in.(584 mm)|
|Cylinder Depth||18 in.(457 mm)|
|Cylinder Volume||4.3 cu. ft.(122 L)|
|Wash Speed||43 rpm|
|Distribution Speed||90 rpm|
|Extraction Speed||530 rpm|
|Extraction G-Force||90 Gs|
|Drive Motor||1 HP(0.75 kW)|
|Inlet Connection||0.75 in.(19 mm)|
|Drain Valve||2 in.(51 mm)|
Specifications and appearance are subject to change without notice.