DISTRIBUTION MAINTENANCE BULLETIN
B22MB95008
01234567-6-x2xxxxxxxxx
November 27, 1995
64046, 72058 & 72046 USERS of RECORD

SUBJECT: PRESSURE TRANSDUCER RETROFIT


Dear MILNOR Customer:

We have finally concluded our investigation into inaccurate levels with the electronic level sensing system on the 64046, 72046 and 72058 washer/extractors.

We have concluded that there is a problem with the air piping which leads from the back of the shell of the machine to the level transducer.

We have changed the routing and design of this piping to insure that water levels are accurate in the machine. The attached instructions show the new air tubing connection method which must be implemented on your machine. We have also shipped to you, under separate cover, the necessary components to make the changes in these connections.

We hope that you implement these minor piping changes immediately to insure proper levels and water consumption in the machine.

If we can be of any assistance with technical information, please feel free to call or fax at the following numbers

Phone: 504-464-0163
FAX: 504-469-9777

Best regards,

PELLERIN MILNOR CORPORATION



Daniel H. Albers
Service Engineer

DHA/das