Bearing Knocking
NEW 3022F & 42032F MACHINES
Service Bulletin
Date: March 5, 1998
Re: NEW 3022F & 42032f
DATE: March 5, 1998
TO: All Service Managers FROM: Gary Lazarre
COMPANY: MILNOR Dealerships RETURN TO:
SUBJECT: NEW 3022F & 42032F MACHINES
We had a recent complaint about a "bearing knocking" in a 30022F machine.
Upon investigation, the field engineer found that the bearing clearance was too big. As a matter of fact, he took out 16/1000's of shim material in order to set the bearing at 3/1000's clearance.
The question is "Do you hear reports of knocking bearings on these machines in the field?".
Please query your field engineers and feed back data when available.
Thanks and best regards,
PELLERIN MILNOR CORPORATION
Gary L. Lazarre
Manager
Customer Service
GLL/das
cc: KWG