1. Connect data storage device cable to the transfer port on the back of the MILTRON. The ready light on the data storage device will come on.
2. Press Ctrl - K on the MILTRON.
3. Press Ctrl - T.
4. Press Escape.
5. Enter the Password.
6. Press Escape twice.
7. Turn program key.
8. Press the "Line Feed" key on MILTON to advance cursor to "Data Storage Options"
9. Press Return
10. Move the cursor to "Interrogate Data Storage Device" and press "Return". If the data storage device is properly connected to the MILTRON, the "Xfer Status" on the bottom of the MILTRON screen will read "Data Device Rdy." If this message is not displayed, do not continue until connections are checked and the proper message is displayed.
11. Press "Line Feed" until cursor is highlights "Download from Data Storage Device".
12. Press Return
13. The "Transmit" light on the Data Storage Device will come on.
14. After the transmit light goes off, the "Xfer Status" on the bottom of the MILTRON screen will read "Download Complete". (If any other message is displayed, then an error has occurred and the upload was not successful).
15. Press Escape until you have returned to the Main Screen of the MILTRON.
16. Turn key to the run position.
17. Press Ctrl - D restart the CBW.

mrs 5-29-01