Soft Start > Inverte
How to change the Baldor SoftStart to an Inverter Drive
Parts required, voltage specific.
See attached for instructions, wiring and programming constants.
Kit KTWSOFSTRIR
2ea. 09B323 Din Relay Base
2ea. 09C024D37 14 Pin Relay 120 volt (CSBAA and CSBAC)
1ea. 09MC04DNRL 6 inches Din Rail
1ea. 09CF007537 7.5 second 120 volt time delay relay (CDVS)
1ea. 09B313A Term Block 11-pin din mount base
1ea. 09MV100RES 100 ohm 225 watt resistor
2ea. 09MV10DBBK Brackets to mount resistor
31RA175T 175deg Thermostat N.C.
1ea 03 BL1X1 Bracket for Thermostat
Inverters will change part numbers, depending on voltage.
As of Feb.26,2014 we use;
09MWB01174 Yaskawa V1000 11 amp 200 to 240 volt
09MWB00596 Yaskawa V1000 5 amp 380 to 440 volt
Any other voltages contact Milnor Service Department.
504 467 9591 or
[email protected]
sdd 2/26/2014
