Pellerin Milnor Corporation

Technical Knowledge Base

"run 00"

The display says "RUN 00' and won't allow a formula enter
PROBLEM: The display says "RUN 00" and will not allow a formula to be entered.
TROUBLESHOOTING PROCEDURE:

1. Check that the CRS+ input is grounded. Check the relay and multiplex board.
2. If the cursor is blinking over both "00," the keypad is probably bad. Replace the keypad.


eh 4/23/02
Last updated: 08/26/2008 / Node ID: 483 / Key Chain: 12.1.11E.1E2.1E3.