Required parts:
1. VGA extention cable: Call Black Box and order the needed length of part number HM-EVNPS05. Cable ends should be female on screen end and male on the transmitter end. The monitor end may change depending on the manufacturer.

2. The video splitter is Black Box part number AC056A-R2. Extention of 200 feet is possible with the cable mentioned above. Extention of 700 feet is possible with a booster - Black Box part number HM-AC074A. See cable specs in the BB catalog.

3. A power supply comes with the video splitter. The power supply is for 110V 60Hz only. It requires 9VDC 300 to 1000mA.

4. A 5 foot cable is needed to go from the MILNOR board to the splitter box. See MILNOR part numbers for this cable, or order from Black Box.

The phone number for Black Box is 877-877-BBOX

SUMMARY:
1. Two boxes are required: a remote box and a video box. The remote box has the receiver board and power supply mounted. The video box has the remote monitor mounted. The remote and video boxes require 120 VAC.
2. The video cable for the monitor plugs into the receiver board in the remote box.
3. The length of the video cable for the monitor requires the two boxes be mounted close.
4. The transmitter board and splitter harness is mounted in the MILTRON.
5. The 18 conductor twisted pair and ground wire must be run (in conduit) from the MILTRON to the remote box.