The how to read electrical schematic section of the manual shows the pin configuration of the relay and the socket with Milnor Electrical Numbering Configurations. The relay and the plug in base are numbered, but do not use the Milnor Electrical Numbering Configuration. Do not use the numbers embossed into the relay mounts.

We have used a standard 14 pin relay mount (now referred to as Grey Base 1). There was a shortage of these mounts and we had to use an alternate supplier. This alternate can be one of either two types (referred to as Grey Base 2 or Black Base). I have attached a picture of the three different mounts and a sticker that is now being affixed to the inside of the control panels. I have also included another picture showing the relay mounts both 11 pin and 14 pin including markings on the screw terminals for the appropriate Milnor contact numbers.

CSH 11-11-10