February 28, 2001


CITIZEN GSX-190 PRINTER WORK ON SERIAL MILTRAC DEVICES and
SERIAL INTERFACE CARD - p/n AH66805-0


This also applies to serial dryer, serial MILTRON, DEVICEMASTER and other BELTBOX controllers.

See notes below for non-serial CBW's.

The first thing that is necessary is to install the serial interface in the printer. This requires the punch out side panel to be taken away and the serial interface card installed in the printer with 2 screws.

The dipswitches then need to be set as follows:

BAUD RATE
9600 Baud
1